Grades
A-208T A-218T
Product Description
ABS resin, nylon resin, polycarbonate, and other plastic raw materials such as PMMA are all featured with hygroscopicity, therefore, they will need several hours to carry out dry treatment before forming, this drying process has brought a lot of inconvenience for plastics processing.
A-208T plastic dehydration master-batch is a new type of environment-friendly plastics additive developed by Korllin Ecoplastics independently, which has solved the problem of the dry treatment of raw materials before the forming processing of the ABS resin, nylon resin, polycarbonate, and PMMA. A-208T plastic dehydration master-batch can be pre-mixed with the raw materials with a small amount of proportion, and the dry treatment process can be omitted, you can directly carry out the injection molding, extrusion molding processing for the ABS resin, nylon resin, polycarbonate, and PMMA, therefore the A-208T plastic dehydration master-batch will save time, efforts and costs for the plastic processing. A-208T plastic dehydration master-batch mainly takes the natural powder materials as its raw materials, which has expired a special surface treatment that makes it perform some subtle reactions with water and form some new substances, at the same time it will not affect the physical properties and functional performance of the plastics. A-208T plastic dehydration master-batch can be used in the processing of ABS resin, nylon resin, polycarbonate, PMMA, as well as some new materials and renewable materials.
Products Applications
A-208T plastic dehydration master-batch mainly uses in the injection molding and extrusion products of ABS resin, nylon resin, polycarbonate, PMMA, as well as some new materials and renewable materials.
Specifications
&©|8226; Appearance: white, light grey
&©|8226; Melt Flow Rate: 8 ~ 12 g/10min
&©|8226; water absorption rate (the ratio between the weight of the absorbed water and the weight of itself): ¡Ý 20%
&©|8226; softening point |
Home
